Hangzhou Ecoographix Digital Technology Co., Ltd.
Hangzhou EcooGraphix Digital Technology Co.,LTD
Add to Cart
High Resolution Flexographic Engraving Machine Flexo CTP For Label Printing
Model: FL-400
Production Description:
FL-400 is a semi-automatic digital flexo plotter utilizing infrared imaging at a wavelength of 830nm, which combines direct imaging technology with superior automation. The device is small, stable and easy to maintain.
Specification:
| Model | FL-400 |
| Exposing Mothod | External Drum |
| Imaging System | 16-channel |
| Throughput | 1.25 m²plates/hour |
| Max.output Size | 430mm x 330mm |
| Media Type | Heat corrosive film, Digital water washed letterpress, Digital water washed flexo plate, Digital solvent washed flexo plate, Thermal PS plate* * Plate thickness is 0.15mm max and adhesive tape is needed on three sides edge |
| Plate Thickness | 0.14mm to 1.70mm |
| Resolution | 4000dpi |
| Application | Label and trademark |
| Interface | USB 2.0 |
| Plate Loading | Manual load and unload |
| Focus Adjust | Autofocus |
| Laser Power | High power semiconductor laser diode |
| Net Weight | About 280kg |
| Machine Size(WxLxH)mm | 830 x 630 x 1056mm |
| Power Supply | 220v/50hz, 60hz mainframe 0.5kw, vacuum 2.0kw |
| Operation Environment | recommended:18-30ºC, Max.18-26ºC, humidity:10-80% |
Flexo Relief Plate Making Processing:
1.Computer to Flexo Plate:
Before plate making, the computer system is used to control the image output device to output the image laser engraved on the CTP resin relief plate;
2. Plate Exposing,Washing and Drying by the flexo plate processor :
The CTP resin relief plate is placed in the middle position, the exposure time is set, and the resin at the exposure position is hardened by UV light, then the upper cover 1 is opened, water is poured into the water tank 4 to 2mm above the brush tip, and the water on the green patch is absorbed with absorbent cotton, and the back of the exposed CTP resin relief plate is attached to the green patch with double-sided tape, so that the plate is facing downward, and the plate is washed in the water tank 4 of the plate washing device.
After washing, the water on the plate is absorbed with an absorbent sponge, and then the plate is removed from the green patch. The water used for washing the plate is filtered by the water filter device, and sprayed out by the water sprayer 11 above the water filter device after heating.
After washing the plate, it is placed in the drying device for drying, and finally placed in the drawer of the post-exposure device 6 for exposure to make a printing plate.