Hangzhou Ecoographix Digital Technology Co., Ltd.
Hangzhou EcooGraphix Digital Technology Co.,LTD
Add to Cart
Processless Thermal CTP Plate Chemistry Free Offset Aluminum Plate
♥ Application
EcooGraphix ECOO-G is a new, environmentally friendly, Development On Press CTP plate.
It can be run directly on a printing press after imaging, without a need for chemical processing.
Recommended application to press procedures of ECOO-G:
1). Clean all the inks on the blanket;
2). Start the press machine, apply the water roller, run 30-40 seconds;
3). Apply the ink rollers 20-30 seconds;
4). Apply the paper and start print.
Remark: If operate step 2 and 3 longer, paper will be wasted less.
♠ Specification
Model ECOO-G
Plate Type Thermal-negative type
Application High grade commercial and newspaper printing
Substrate Electrolyte graining and Anodized AL substrate
Thickness 0.15mm/ 0.30mm
Maximum Short Grain Width Maximum width 1,280 mm
Spectrum Scope 800-850 nm
Photosensitive Wave Length 830 nm
Platesetter Various dominant thermal platesetters in the market
Coating Color Grey
Low-energy Imaging 130-150 mj/cm²
The Period Of Latent Image Stabilization ≤ 7 days
Recommended Screen Method 1-99% @200 LPI AM or 20μm FM or mixture
The Paper Number Of Start-up < 50 sheets
Safety Light 4 hours under yellow light; 1 hour under fluorescent lamp;
Direct exposure under natural light is safe but not recommended.
Processing Without processing, directly on press
Run Length 100,000 impressions; Actual run length depends on printing conditions
Shelf Life 12 months under recommended condition
Transportation Packed in seal and stored by means of prevention from light, moisture,
overheat and high humidity
Storage Recommended condition: 18ºC-24ºC, 40%-50% RH.
| Model | ECOO-G |
| Plate Type | Thermal-negative type |
| Application | High grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm/ 0.30mm |
| Maximum Short Grain Width | Maximum width 1,280 mm |
| Spectrum Scope | 800-850 nm |
| Photosensitive Wave Length | 830 nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Coating Color | Grey |
| Low-energy Imaging | 130-150 mj/cm² |
| The Period Of Latent Image Stabilization | ≤ 7 days |
| Recommended Screen Method | 1-99% @200 LPI AM or 20μm FM or mixture |
| The Paper Number Of Start-up | < 50 sheets |
| Safety Light | 4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended. |
| Processing | Without processing, directly on press |
| Run Length | 100,000 impressions; Actual run length depends on printing conditions |
| Shelf Life | 12 months under recommended condition |
| Transportation | Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity |
| Storage | Recommended condition: 18ºC-24ºC, 40%-50% RH. |
Applied parameters in imaging device
| CTP Model Data | Kodak Trendsetters | LOTTEM 400(TH1.7) | MAGNUS 400 | Screen 8600S |
| Laser Power | 15-17W | 300-320mw | 19.5-21.5W | 80-90 % |
| Drum Speed | 250-300rpm | 850-900rpm | 400-450rpm | 800-900rpm |
| Resolution | Customized | Customized | Customized | Customized |
| Parameter That Need Set Up | Focus/ Zoom | Focus/ Zoom | Focus/ Zoom | Focus/ Zoom |
*Note: Higher exposure energy will make the image contrast more clear, and benefit to the plate run length;
while over high/low exposure energy will affect the image quality negatively.
ECOO-G Processless CTP Plate Video: https://youtu.be/LLqNaY1ivcI
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution;
while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
♣ Success Case
♥ Producing And Packaging
From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.